This article needs additional citations for verification. (July 2011) (Learn how and when to remove this template message)
Seasonal adjustment or deseasonalization is a statistical method for removing the seasonal component of a time series. It is usually done when wanting to analyse the trend, and cyclical deviations from trend, of a time series independently of the seasonal components. It is normal to report seasonally adjusted data for unemployment rates to reveal the underlying trends and cycles in labor markets. Many economic phenomena have seasonal cycles, such as agricultural production and consumer consumption, e.g. greater consumption leading up to Christmas. It is necessary to adjust for this component in order to understand underlying trends in the economy, so official statistics are often adjusted to remove seasonal components.
Time series components
The investigation of many economic time series becomes problematic due to seasonal fluctuations. Time series are made up of four components:
- : The seasonal component
- : The trend component
- : The cyclical component
- : The error, or irregular component.
The difference between seasonal and cyclic patterns:
- Seasonal patterns have a fixed and known length, while cyclic patterns have variable and unknown length.
- Cyclic pattern exists when data exhibit rises and falls that are not of fixed period (duration usually of at least 2 years).
- The average length of a cycle is usually longer than that of seasonality.
- The magnitude of cyclic variation is usually more variable than that of seasonal variation.
The relation between decomposition of time series components
- Additive decomposition: , where is the data at time .
- Multiplicative decomposition: .
- Logs turn multiplicative relationship into an additive relationship: :
- An additive model is appropriate if the magnitude of seasonal fluctuations does not vary with level.
- If seasonal fluctuations are proportional to the level of the series, then a multiplicative model is appropriate. Multiplicative decomposition is more prevalent with economic series.
This section may require cleanup to meet Wikipedia's quality standards. The specific problem is: make less terse; what is the number 6 at start of last paragraph? (March 2017) (Learn how and when to remove this template message)
Unlike the trend and cyclical components, seasonal components, theoretically, happen with similar magnitude during the same time period each year. The seasonal components of a series are sometimes considered to be uninteresting and to hinder the interpretation of a series. Removing the seasonal component directs focus on other components and will allow better analysis.
Different statistical research groups have developed different methods of seasonal adjustment, for example X-13-ARIMA and X-12-ARIMA developed by the United States Census Bureau; TRAMO/SEATS developed by the Bank of Spain; MoveReg (for weekly data) developed by the United States Bureau of Labor Statistics, STAMP developed by a group led by S. J. Koopman; and “Seasonal and Trend decomposition using Loess” (STL) developed by Cleveland et al. (1990). While X-12/13-ARIMA can only be applied to monthly or quarterly data, STL decomposition can be used on data with any type of seasonality. Furthermore, unlike X-12-ARIMA, STL allows the user to control the degree of smoothness of the trend cycle and how much the seasonal component changes over time. X-12-ARIMA can handle both additive and multiplicative decomposition whereas STL can only be used for additive decomposition. In order to achieve a multiplicative decomposition using STL, the user can take the log of the data before decomposing, and then back-transform after the decomposition.
Brief introduction to process of X-12-ARIMA:
For example: description assumes monthly data. Additive decomposition: : Multiplicative decomposition:
- 1. Using moving-average smoothing method to estimate the trend-cycle for all periods. In the monthly data, use 12-month centered moving average is appropriate to be applied to estimate the trend-cycle component.
- 2. Ratios of data to trend computed(called“centered ratios”)---which means remove the smoothed series from to leave and .
- 3. Separate 3 * 3 MA (moving average) applied to each month of centered ratios to form rough estimate of .
- 4. Divide centered ratios by estimate of to get estimate of .
- 5. Reduce extreme value of
- 6. Multiply by to get modified centered ratios.
- 7. Take another 3 * 3 MA of each month of the year individually applied to modified ratios to get revised .
- 8. Original data divided by new estimate of gives the preliminary seasonally adjusted series.
- 9. Trend-cycle estimated by applying a weighted Henderson MA to the preliminary seasonally adjusted values.
- 10. Repeat Step 2. New ratios are obtained by dividing the original data by the new estimated trend-cycle
- 11. Repeat Steps 3–6 using new ratios and applying a 3 * 5 MA instead of a 3 * 3 MA.
- 12. Repeat Step 7 but using a 3 * 5 MA instead of a 3 * 3 MA, that is taking 5 * 3 MA of each month of the year individually by using the modified data applied to modified ratios to get revised .
- 13. Repeat Step 8 but using the new seasonal component obtained in Step 12 to obtain seasonally adjusted values.
- 14. Remainder component obtained by dividing seasonally adjusted data from Step 13 by the trend-cycle obtained in Step 9.
- 15. Extreme values of remainder component are reduced as in Step 5.
- 16. A series of modified data is obtained by multiplying the trend-cycle, seasonal component, and adjusted irregular component together.
Repeat whole process two more times with modified data. On final iteration, the 3 * 5 MA of Steps 11 and 12 is replaced by either a 3 * 3, 3 * 5, or 3 * 9 moving average, depending on the variability in the data.
6. Time series Each group provides software supporting their methods. Some versions are also included as parts of larger products, and some are commercially available. For example, SAS includes X-12-ARIMA, while Oxmetrics includes STAMP. A recent move by public organisations to harmonise seasonal adjustment practices has resulted in the development of Demetra+ by Eurostat and National Bank of Belgium which currently includes both X-12-ARIMA and TRAMO/SEATS. R includes STL decomposition. The X-12-ARIMA method can be utilized via the R package "X12" . EViews supports X-12, X-13, Tramo/Seats, STL and MoveReg.
One well-known example is the rate of unemployment, which is represented by a time series. This rate depends particularly on seasonal influences, which is why it is important to free the unemployment rate of its seasonal component. Such seasonal influences can be due to school graduates or dropouts looking to enter into the workforce and regular fluctuations during holiday periods. Once the seasonal influence is removed from this time series, the unemployment rate data can be meaningfully compared across different months and predictions for the future can be made. Seasonal adjustment is used in the official statistics implemented by statistical software like Demetra+.
When seasonal adjustment is not performed with monthly data, year-on-year changes are utilised in an attempt to avoid contamination with seasonality.
Indirect seasonal adjustment
When time series data has seasonality removed from it, it is said to be directly seasonally adjusted. If it is made up of a sum or index aggregation of time series which have been seasonally adjusted, it is said to have been indirectly seasonally adjusted. Indirect seasonal adjustment is used for large components of GDP which are made up of many industries, which may have different seasonal patterns and which are therefore analyzed and seasonally adjusted separately. Indirect seasonal adjustment also has the advantage that the aggregate series is the exact sum of the component series. Seasonality can appear in an indirectly adjusted series; this is sometimes called residual seasonality.
Moves to standardise seasonal adjustment processes
Due to the various seasonal adjustment practices by different institutions, a group was created by Eurostat and the European Central Bank to promote standard processes. In 2009 a small group composed of experts from European Union statistical institutions and central banks produced the ESS Guidelines on Seasonal Adjustment, which is being implemented in all the European Union statistical institutions. It is also being adopted voluntarily by other public statistical institutions outside the European Union.
Use of seasonally adjusted data in regressions
By the Frisch–Waugh–Lovell theorem it does not matter whether dummy variables for all but one of the seasons are introduced into the regression equation, or if the independent variable is first seasonally adjusted (by the same dummy variable method), and the regression then run.
Since seasonal adjustment introduces a "non-revertible" moving average (MA) component into time series data, unit root tests (such as the Phillips–Perron test) will be biased towards non-rejection of the unit root null.
Shortcomings of using seasonally adjusted data
Use of seasonally adjusted time series data can be misleading. This is because the seasonally adjusted series contains both the trend-cycle component and the error component. As such, the seasonally adjusted data will not be "smooth" and what appears to be "downturns" or "upturns" may actually be randomness in the data. For this reason, if the purpose is finding turning points in a series, it is better to use the trend-cycle component rather than the seasonally adjusted data.
- "What is seasonal adjustment?". www.bls.gov. Archived from the original on 2011-12-20.
- "Retail spending rise boosts hopes UK can avoid double-dip recession". The Guardian. 17 February 2012. Archived from the original on 8 March 2017.
- 2.1 Graphics - OTexts. www.otexts.org. Archived from the original on 2018-01-17.
- "MCD - Seasonal Adjustment Frequently Asked Questions". www.census.gov. Archived from the original on 2017-01-13.
- Directorate, OECD Statistics. "OECD Glossary of Statistical Terms - Seasonal adjustment Definition". stats.oecd.org. Archived from the original on 2014-04-26.
- "STAMP". www.stamp-software.com. Archived from the original on 2015-05-09.
- 6.5 STL decomposition | OTexts. www.otexts.org. Archived from the original on 2018-05-12. Retrieved 2016-05-12.
- OECD, Short-Term Economic Statistics Expert Group (June 2002), Harmonising Seasonal Adjustment Methods in European Union and OECD Countries
- Hyndman, R.J. 6.4 X-12-ARIMA decomposition | OTexts. www.otexts.org. Archived from the original on 2018-01-17. Retrieved 2016-05-15.
- Kowarik, Alexander (February 20, 2015). "Xx12" (PDF). cran.r-project.org. Archived (PDF) from the original on December 6, 2016. Retrieved 2016-08-02.
- 6.1 Time series components - OTexts. www.otexts.org. Archived from the original on 2018-05-12.
- Hungarian Central Statistical Office. Seasonal adjustment methods and practices, Budapest, July 2007
- Thomas D. Evans. Direct vs. Indirect Seasonal Adjustment for CPS National Labor Force Series, Proceedings of the Joint Statistical Meetings, 2009, Business and Economic Statistics Section
- Marcus Scheiblecker, 2014. "Direct Versus Indirect Approach in Seasonal Adjustment," WIFO Working Papers 460, WIFO. Abstract at IDEAS/REPEC
- Maddala, G. S.; Kim, In-Moo (1998). Unit Roots, Cointegration, and Structural Change. Cambridge: Cambridge University Press. pp. 364–365. ISBN 0-521-58782-4.
- Hyndman, Rob J; Athanasopoulos, George. Forecasting: principles and practice. Archived from the original on 12 May 2018. Retrieved 20 May 2015.
- Enders, Walter (2010). Applied Econometric Time Series (Third ed.). New York: Wiley. pp. 97–103. ISBN 978-0-470-50539-7.
- Ghysels, Eric; Osborn, Denise R. (2001). The Econometric Analysis of Seasonal Time Series. New York: Cambridge University Press. pp. 93–120. ISBN 0-521-56588-X.
- Hylleberg, Svend (1986). Seasonality in Regression. Orlando: Academic Press. pp. 36–44. ISBN 0-12-363455-5.
- Jaditz, Ted (December 1994). "Seasonality: economic data and model estimation". BLS Monthly Labor Review. pp. 17–22.